Difference between revisions of "Gazebo Tutorial"

Jump to: navigation , search
(Run SDK Examples)
(Run SDK Examples)
Line 97: Line 97:
*Start Simulated Pick and Place example:
*Or, Start Simulated Pick and Place example:
<syntaxhighlight lang="bash" enclose="div">
<syntaxhighlight lang="bash" enclose="div">
$ ./intera.sh sim
$ ./intera.sh sim

Revision as of 18:09, 31 January 2018

This tutorial describes how to use Sawyer with Gazebo the standard Physics Simulator for ROS.

Note: This page describes an upcoming feature in Intera 5.2. Gazebo Simulation for Sawyer is not yet released. There will be a release announcement in 2018

Gazebo Logo

Please visit the Gazebo Tutorials homepage for more information


  • Make sure you have followed the Workstation Setup tutorial before beginning this section. Sawyer Gazebo is only available for Ubuntu 16.04, ROS Kinetic, and Gazebo 7.
  • Ensure the following software packages are installed:

$ sudo apt-get install gazebo7 ros-kinetic-qt-build ros-kinetic-gazebo-ros-control ros-kinetic-gazebo-ros-pkgs ros-kinetic-ros-control ros-kinetic-control-toolbox ros-kinetic-realtime-tools ros-kinetic-ros-controllers ros-kinetic-xacro python-wstool ros-kinetic-tf-conversions ros-kinetic-kdl-parser ros-kinetic-sns-ik-lib

Sawyer Simulator Installation

  • From your catkin workspace where the SDK resides, use wstool to install and update:

Install sawyer_simulator

$ cd ~/ros_ws/src
$ git clone https://github.com/RethinkRobotics/sawyer_simulator.git
$ cd sawyer_simulator
$ git checkout release-5.2.0
$ cd ~/ros_ws/src
$ wstool init .
$ wstool merge sawyer_simulator/sawyer_simulator.rosinstall
$ wstool update

IMPORTANT: Make sure all simulator repositories update to their proper branch.

Build Source

$ source /opt/ros/kinetic/setup.bash
$ cd ~/ros_ws
$ catkin_make


  • The intera.sh shell has a special hook for Simulation. Run the Intera shell script with sim specified:
$ ./intera.sh sim
  • Start simulation with controllers:
$ roslaunch sawyer_gazebo sawyer_world.launch

Smoke Test

Check if the simulator was installed and launched successfully by typing the following commands:

$ rosnode list

This should list the nodes as here.

$ rostopic list

This should list the topics as here.

$ rostopic echo /robot/state

By default, the following messages should be displayed at 100 HZ.

enabled: False
stopped: False
error: False
estop_button: 0
estop_source: 0

Run SDK Examples

  • Start Joint Torque Springs example:
$ ./intera.sh sim
$ roslaunch sawyer_gazebo sawyer_world.launch
*in a new terminal*
$ ./intera.sh sim
$ rosrun intera_examples joint_torque_springs.py
  • Or, Start Simulated Pick and Place example:
$ ./intera.sh sim
$ roslaunch sawyer_sim_examples sawyer_pick_and_place_demo.launch

For additional information on the interfaces that are implemented with this release, visit the Simulator API page.


  • Please refer to the troubleshooting page Gazebo Troubleshooting